Configuring The Connection – Vnc - HEIDENHAIN TNC 620 User Manual

10
Configuring the connection – VNC
Configuring an external computer
You do not need an additional VNC server for your
external computer for connecting to VNC.
Install and configure the VNC server, e.g. the TightVNC
server, before configuring the control.
Configuring the control
Proceed as follows to configure the control:
Press the DIADUR key to open the HeROS menu
Select Remote Desktop Manager
The control opens the Remote Desktop Manager.
Press New connection
Press VNC
The control opens the Edit the connection pop-up window.
Edit the connection
Setting
Connection name:
Restarting after end of
connection:
Automatic starting upon
login
Add to favorites
Move to the following
workspace
Release USB mass memory
Calculator
User name:
Password
358
HEROS functions | Remote Desktop Manager (option 133)
Meaning
Name of the connection in the Remote Desktop Manager
Behavior with terminated connection:
Always restart
Never restart
Always after an error
Ask after an error
Connection automatically established during control power-up
Connection icon in the task bar:
Single click with the left mouse button
The control switches to the desktop of the connection.
Single click with the right mouse button
The control displays the connection menu.
Number of desktop for the connection, whereby desktops 0 and
1 are reserved for the NC software
Default setting: Third desktop
Permit access to connected USB mass memory
Host name or IP address of the external computer. In the
recommended configuration of the IPC 6641, the IP address
192.168.254.3 is used
Name of the user to be logged on
Password for connecting to the VNC server
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Input
Required
Required
Required
Required
Required
Required
Required
Required
Required