Dnc Connection With User Authentication - HEIDENHAIN TNC 620 User Manual

Setup, testing and running nc programs

Hide thumbs Also See for TNC 620:

Table of Contents

HEROS role name

NC.RemoteProgramRun

NC.ConfigUserAdv

NC.Data.AccessServiceRead

DNC connection with user authentication

Introduction

If user administration is active, DNC applications also need to

authenticate a user for the correct rights to be assigned.

To do this, the connection is routed over an SSH tunnel. This

method assigns the remote user to a user set up on the control,

granting the remote user this user's rights.

Besides, the encryption used with the SSH tunnel protects the

communication from attackers.

Start of NC program via remote interface, e.g. DNC

Configuration access to the contents that have been enabled through code

Read-only access to the PLC partition during servicing

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018

HEROS functions | User administration