Configuring The User Administration - HEIDENHAIN TNC 620 User Manual

HEROS functions | User administration

Configuring the user administration

User administration is inactive in the control's factory default
setting. This status is called legacy mode.
Further information: "", Page 402
Before user administration can be used, you need to configure it.
Perform the following steps for configuration:
1. Activate the user administration and create the useradmin user
2. Set up a database
Further information:
Further information:
Page 406
Further information:
Page 407
3. Create further users
Further information: "Creating further users", Page 410
Proceed as follows to call the user administration:
Select the HEROS menu icon
Select the Settings menu item
Select the UserAdmin menu item
The control opens the User management window.
1. Proceed as follows to activate the user administration:
Call the user administration
Press the User administration active soft key
The control shows the message Password for user 'useradmin'
missing.
The function Anonymize users in login data is active
in the factory default setting. As a consequence, the
user name is blacked out in all log data. If your company
permits the filing of personal data on IT systems, you
can deactivate this function.
After user administration has been activated, create the useradmin
function user.
Proceed as follows to create the useradmin user:
Press Password for useradmin
The control opens the Password for user useradmin pop-up
window.
Enter the password for the useradmin user
Select Set new password
The message Settings and password for useradmin were
changed appears.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
"Local LDAP database", Page 405
"LDAP on remote computer",
"Connection to a Windows domain",
10
403