Programmable Axes - HEIDENHAIN TNC 620 User Manual

Fundamentals | NC fundamentals

Programmable axes

In the default setting, the programmable axes of the control are in
accordance with the axis definitions specified in DIN 66217 .
The designations of the programmable axes are given in the table
below.
Principal axis Parallel axis
X U
Y V
Z W
Refer to your machine manual.
The number, designation and assignment of the
programmable axes depend on the machine.
Your machine tool builder can define further axes, such
as PLC axes.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Rotary axis
A
B
C
3
107