HEIDENHAIN TNC 620 User Manual page 417

HEROS functions | User administration
NC operator roles:
Role
NC.Operator
NC.Programmer
NC.Setter
NC.AutoProductionSetter
NC.LegacyUser
NC.AdvancedEdit
NC.RemoteOperator
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Rights
HEROS role name
This role allows you to run NC programs.
NC.OPModeProgramRun
This role grants the rights of NC programming.
This role grants the rights of the Operator role, as well as the following rights:
NC.EditNCProgram
NC.EditPalletTable
NC.EditPresetTable
NC.EditToolTable
NC.OPModeMDi
NC.OPModeManual
This role allows you to edit the pocket table.
This role grants the rights of the Programmer role, as well as the following rights:
NC.ApproveFsAxis
NC.EditPocketTable
NC.SetupDrive
NC.SetupProgramRun
This role allows you to execute all NC functions, including programming a sched-
uled NC program start.
This role grants the rights of the Setter role, as well as the following rights:
NC.ScheduleProgramRun
With the legacy user role, the control's behavior regarding NC programming
is identical to that of older software versions without user administration. The
user administration remains active. The LegacyUser has the same rights as the
AutoProductionSetter.
This role allows you to use special functions of the NC and table editors.
FN 17 and editing the table head
Replacement for code number 555343
NC.EditNCProgramAdv
NC.EditTableAdv
This role allows NC program start via the DNC interface.
NC.RemoteProgramRun
UNIX group Basic ID number
NCOpPgmRun
NCEdNCProg
NCEdPal
NCEdPreset
NCEdTool
NCOpMDI
NCOpManual
NCApproveFsAxis
NCEdPocket
NCSetupDrv
NCSetupPgRun
NCSchedulePgRun
NCEditNCPgmAdv
NCEditTableAdv
NCRemotePgmRun
10
302
305
309
308
306
301
300
319
307
315
303
304
327
328
329
417