Data Transfer To Or From An External Data Carrier - HEIDENHAIN TNC 620 User Manual

3
Removing USB devices
To remove a USB device, proceed as follows:
Move the cursor to the left-hand window
Press the MORE FUNCTIONS soft key
Remove the USB device

Data transfer to or from an external data carrier

Before you can transfer data to an external data
medium, you must set up the data interface.
Further information:
Page 386
Press the PGM MGT key
Press the WINDOW soft key to select the screen
layout for file transfer
Use the arrow keys to move the cursor to the file
you want to transfer
The control moves the cursor up and down
within a window.
The control moves the cursor from the right to
the left window, and vice versa.
If you wish to copy from the control to the external data medium,
move the cursor in the left window to the file to be transferred.
If you wish to copy from the external data medium to the control,
move the cursor in the right window to the file to be transferred.
Press the SHOW TREE soft key to select another
drive or directory
Use the arrow keys to select the desired
directory
Press the SHOW FILES soft key
Use the arrow keys to select the desired file
Press the COPY soft key
Confirm with the ENT key
A status window appears on the control,
informing about the copying progress.
Alternative: Press the WINDOW soft key
The control displays the standard file manager
window again.
82
"Setting up data interfaces",
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018
Fundamentals | File management