HEIDENHAIN TNC 620 User Manual page 375

Setup, testing and running nc programs

Hide thumbs Also See for TNC 620:

Table of Contents

HEROS functions | Window manager

Configuring the control

Adjusting the firewall settings:

The State Reporting Interface uses TCP Port 19090 to transfer

the acquired operating states.

Accesses to the SRI from the company network (X26 connection)

must be permitted in the firewall settings.

Further information:

"Firewall", Page 383

If the SRI is accessed locally via an IPC connected to

the machine network (X116), eth0 (X26) can also remain

Activating the State Reporting Interface:

In the control's factory default setting, the SRI is deactivated.

Press the DIADUR key to open the HEROS menu

Select the Settings menu item

Select the State Reporting Interface menu item

Activate the State Reporting Interface in the SRI pop-up

Further information:

"Overview of taskbar", Page 365

To clear all previous operating states, use the

Clear historical data button.

HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 10/2018