Introduction To Configuration And Commissioning; Configuration Flowchart - Emerson Micro Motion 2700 Configuration And Use Manual

3 Introduction to configuration and
commissioning
Topics covered in this chapter:
•
•
•
•
•
3.1

Configuration flowchart

Use the following flowchart as a general guide to the configuration and commissioning
process.
Some options may not apply to your installation. Detailed information is provided in the
remainder of this manual. If you are using the Weights & Measures application, additional
configuration and setup are required.
Configuration and Use Manual
Configuration flowchart
Default values and ranges
Enable access to the off-line menu of the display
Disable write-protection on the transmitter configuration
Restore the factory configuration

Introduction to configuration and commissioning

19