Configure Density Measurement Unit - Emerson Micro Motion 2700 Configuration And Use Manual

Configure process measurement
4.5.1

Configure Density Measurement Unit

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Measurements > Density > Density Unit
Overview
Density Measurement Unit specifies the units of measure that will be displayed for density
measurement.
Procedure
Set Density Measurement Unit to the option you want to use.
The default setting for Density Measurement Unit is g/cm3 (grams per cubic centimeter).
Options for Density Measurement Unit
The transmitter provides a standard set of measurement units for Density Measurement Unit.
Different communications tools may use different labels.
Table 4-10: Options for Density Measurement Unit
Unit description
Specific gravity unit (not tem-
perature-corrected)
Grams per cubic centimeter
Grams per liter
Grams per milliliter
Kilograms per liter
Kilograms per cubic meter
Pounds per U.S. gallon
Pounds per cubic foot
Pounds per cubic inch
API gravity
Short ton per cubic yard
46
OFF-LINE MAINT > OFF-LINE CONFG > UNITS > DENS
ProLink > Configuration > Density > Density Units
Device Tools > Configuration > Process Measurement > Density
Display ProLink II
SGU SGU
G/CM3 g/cm3
G/L g/l
G/mL g/ml
KG/L kg/l
KG/M3 kg/m3
LB/GAL lbs/Usgal
LB/CUF lbs/ft3
LB/CUI lbs/in3
D API degAPI
ST/CUY sT/yd3
Micro Motion
Label
ProLink III
SGU
g/cm3
g/l
g/ml
kg/l
kg/m3
lbs/Usgal
lbs/ft3
lbs/in3
degAPI
sT/yd3
®
Model 2700 Transmitters with Analog Outputs
Field Communica-
tor
SGU
g/Cucm
g/L
g/mL
kg/L
kg/Cum
lb/gal
lb/Cuft
lb/CuIn
degAPI
STon/Cuyd