Configure Sensor Flange Type - Emerson Micro Motion 2700 Configuration And Use Manual

Configure device options and preferences
5.6.7

Configure Sensor Flange Type

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Sensor Flange
Overview
Sensor Flange Type lets you store your sensor's flange type in transmitter memory. This
parameter is not used in processing and is not required.
Procedure
1.
2.
98
Not available
ProLink > Configuration > Sensor > Flange
Device Tools > Configuration > Informational Parameters > Sensor
Obtain your sensor's flange type from the documents shipped with your sensor, or
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Flange Type to the appropriate option.
®
Micro Motion Model 2700 Transmitters with Analog Outputs