Configure Informational Parameters - Emerson Micro Motion 2700 Configuration And Use Manual

Configure device options and preferences
Table 5-2: Status alarms and Status Alarm Severity
Alarm code Status message
A114 mA Output 2 Fixed
A115 No External Input or Polled
Data
A116 Temperature Overrange
(Petroleum)
A117 Density Overrange (Petro-
leum)
A118 Discrete Output 1 Fixed
A119 Discrete Output 2 Fixed
A120 Curve Fit Failure (Concen-
tration)
A121 Extrapolation Alarm (Con-
centration)
A131 Meter Verification in Pro-
gress: Outputs to Last
Measured Value
A132 Sensor Simulation Active
A141 DDC trigger(s) have com-
pleted
5.6

Configure informational parameters

The informational parameters can be used to identify or describe your flowmeter but they
are not used in transmitter processing and are not required.
The informational parameters include:
•
94
Default severity Notes
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Device parameters
- Descriptor
(continued)
Can be set to either Informational or
Ignore, but cannot be set to Fault.
Applies only to transmitters with
the petroleum measurement appli-
cation.
Applies only to transmitters with
the petroleum measurement appli-
cation.
Can be set to either Informational or
Ignore, but cannot be set to Fault.
Can be set to either Informational or
Ignore, but cannot be set to Fault.
Applies only to transmitters with
the concentration measurement
application.
Applies only to transmitters with
the concentration measurement
application.
Applies only to transmitters with
Smart Meter Verification.
Applies only to flowmeters with the
enhanced core processor.
Can be set to either Informational or
Ignore, but cannot be set to Fault.
Applies only to flowmeters with the
enhanced core processor.
Can be set to either Informational or
Ignore, but cannot be set to Fault.
®
Micro Motion Model 2700 Transmitters with Analog Outputs
Configurable?
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes