Configure Sensor Material; Configure Sensor Liner Material - Emerson Micro Motion 2700 Configuration And Use Manual

5.6.5

Configure Sensor Material

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Tube Wetted Material
Overview
Sensor Material lets you store the type of material used for your sensor's wetted parts in
transmitter memory. This parameter is not used in processing and is not required.
Procedure
1.
2.
5.6.6

Configure Sensor Liner Material

Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Tube Lining
Overview
Sensor Liner Material lets you store the type of material used for your sensor liner in
transmitter memory. This parameter is not used in processing and is not required.
Procedure
1.
2.
Configuration and Use Manual
Not available
ProLink > Configuration > Sensor > Sensor Matl
Device Tools > Configuration > Informational Parameters > Sensor
Obtain the material used for your sensor's wetted parts from the documents
shipped with your sensor, or from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Material to the appropriate option.
Not available
ProLink > Configuration > Sensor > Liner Matl
Device Tools > Configuration > Informational Parameters > Sensor
Obtain your sensor's liner material from the documents shipped with your sensor, or
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Liner Material to the appropriate option.
Configure device options and preferences
97