Additional Documentation And Resources - Emerson Micro Motion 2700 Configuration And Use Manual

Before you begin
Table 1-1: Communications tools, protocols, and related information
Communica-
tions tool Supported protocols
Display Not applicable
ProLink II • HART/RS-485
• HART/Bell 202
• Modbus/RS-485
• Service port
ProLink III • HART/RS-485
• HART/Bell 202
• Modbus/RS-485
• Service port
Field Commu- HART/Bell 202
nicator
Tip
You may be able to use other communications tools from Emerson Process Management, such as
AMS Suite: Intelligent Device Manager, or the Smart Wireless THUM
Smart Wireless THUM Adapter is not discussed in this manual. The AMS interface is similar to the
ProLink II interface. For more information on the Smart Wireless THUM Adapter, refer to the
documentation available at www.micromotion.com.
1.4

Additional documentation and resources

Micro Motion provides additional documentation to support the installation and operation
of the transmitter.
Table 1-2:
Topic
Sensor
4
Scope
Basic configuration and
commissioning
Complete configuration
and commissioning
Complete configuration
and commissioning
Complete configuration
and commissioning
Additional documentation and resources
Document
Sensor documentation
Micro Motion
In this manual For more information
Complete user informa- Not applicable
tion. See Appendix A.
Basic user information. User manual
See Appendix B. •
•
•
Basic user information. User manual
See Appendix C. •
•
•
Basic user information. User manual on
See Appendix D. Micro Motion web site
(www.micromo-
tion.com
™
Adapter. Use of AMS or the
®
Model 2700 Transmitters with Analog Outputs
Installed with soft-
ware
On Micro Motion
user documentation
CD
On Micro Motion
web site (www.mi-
cromotion.com
Installed with soft-
ware
On Micro Motion
user documentation
CD
On Micro Motion
web site (www.mi-
cromotion.com