Enable Write-Protection On The Transmitter Configuration - Emerson Micro Motion 2700 Configuration And Use Manual

Completing the configuration
7.3 Enable write-protection on the transmitter
configuration
Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Transmitter Info > Write Protect
Overview
If the transmitter is write-protected, the configuration is locked and nobody can change it
until it is unlocked. This prevents accidental or unauthorized changes to the transmitter
configuration parameters.
138
OFF-LINE MAINT > CONFIG > LOCK
ProLink > Configuration > Device > Enable Write Protection
Device Tools > Configuration > Write-Protection
Micro Motion
®
Model 2700 Transmitters with Analog Outputs