Api Reference Tables - Emerson Micro Motion 2700 Configuration And Use Manual

4.7.4

API reference tables

Table 4-13: API reference tables, associated process fluids, and associated calculation values
Table
name Process fluid
5A Generalized crude and
JP4
5B Generalized products
5D Lubricating oils
6C Liquids with a constant
density base or known
thermal expansion coef-
ficient
23A Generalized crude and
JP4
23B Generalized products
23D Lubricating oils
24C Liquids with a constant
density base or known
thermal expansion coef-
ficient
53A Generalized crude and
JP4
Configuration and Use Manual
Option Setup
A value written by a. Choose Online > Configure > Manual Setup > Measurements > External
digital communica-
tions
b. Set External Temperature to Enabled.
c. Perform the necessary host programming and communications
Note
If the Weights & Measures application is implemented and the trans-
mitter is secured, digital communications cannot be used to write
temperature data to the transmitter.
CTL source data
Observed density and
observed temperature
Observed density and
observed temperature
Observed density and
observed temperature
User-supplied reference
density (or thermal ex-
pansion coefficient) and
observed temperature
Observed density and
observed temperature
Observed density and
observed temperature
Observed density and
observed temperature
User-supplied reference
density (or thermal ex-
pansion coefficient) and
observed temperature
Observed density and
observed temperature
Pressure/Temperature > Temperature.
setup to write temperature data to the transmitter at appropri-
ate intervals.
Reference temperature Density unit
60 °F (non-configurable)
60 °F (non-configurable)
60 °F (non-configurable)
60 °F (non-configurable)
60 °F (non-configurable)
60 °F (non-configurable)
60 °F (non-configurable)
60 °F (non-configurable)
15 °C (configurable)
Configure process measurement
Degrees API
Range: 0 to 100
Degrees API
Range: 0 to 85
Degrees API
Range: −10 to +40
Degrees API
Relative density
Range: 0.6110 to 1.0760
Relative density
Range: 0.6535 to 1.0760
Relative density
Range: 0.8520 to 1.1640
Relative density
Base density
Range: 610 to
3
1075 kg/m
57