Ricoh Aficio MP C305SP Field Service Manual page 1038

3. SP Mode Tables
Selection Dial / Push
This SP displays the classification (tone or pulse) of the telephone line to the access point
for embedded RCG-M. The number displayed (0 or 1) is the result of the execution of
SP5816-151. However, this setting can also be changed manually.
[0 or 1 / 0 / 1 /step]
0: Tone Dialing Phone
153
1: Pulse Dialing Phone
Inside Japan "2" may also be displayed:
0: Tone Dialing Phone
1: Pulse Dialing Phone 10PPS
2: Pulse Dialing Phone 20PPS
Outside Line Outgoing Number
The SP sets the number that switches to PSTN for the outside connection for embedded
RCG-M in a system that employs a PBX (internal line).
• If the execution of SP5816-151 has succeeded and embedded RCG-M has
154
• If embedded RCG-M has connected to an internal line, then the number of the
• If embedded RCG-M has connected to an external line, a comma is displayed with
• The number setting for the external line can be entered manually (including
PPP Certification Time Out
155
[1 to 65536 / 60 / 1 /step]
Dial Up User Name
Use this SP to set a user name for access to remote dial up. Follow these rules when
setting a user name:
156
• Name length: Up to 32 characters
• Spaces and # allowed but the entire entry must be enclosed by double quotation
302
connected to the external line, this SP display is completely blank.
connection to the external line is displayed.
the number. The comma is inserted for a 2 sec. pause.
commas).
marks (").