Ricoh Aficio MP C305SP Field Service Manual page 675

No. Type
-08 D sysarch (LPUX_ENGINE_TIMERCTRL) error
-09 D sysarch (LPUX_RETURN_FACTOR_STR) error
-10
D sysarch (LPUX_GET_PORT_INFO) error
to -12
-35 D read () error
-91
D Sub-system error
to -94
No. Type
Fatal kernel error
[XXXX]: Detailed error code
Due to a control error, a RAM overflow occurred during system processing. One
of the following messages was displayed on the operation panel.
CTL
819
D
• System program defective
• Controller board defective
• Optional board defective
1. Replace controller firmware
HDD defective
[0x6261]
6261 6420 6469 7200 00
gwinit process ending
[0x696e]
0x69742064
VM is full
[0x766d]
0x5f706167
Processing ends at USB loader
[554c]
UL (USB error)
Others
----
Error in the OS
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
"bad dir"
"init died"
"vm_pageout: VM is full"
SC Tables
673