Ricoh Aficio MP C305SP Field Service Manual page 1031

RCG Read Timeout
Sets the length of time (seconds) for the timeout when sent data is written from the RCG
010
during a call over the @Remote network.
[1 to 100 / 60 / 1 second /step]
Port 80 Enable
Controls if permission is given to get access to the SOAP method over Port 80 on the
@Remote network.
011
[0 or 1 / 0 / – ]
0: No. Access denied
1: Yes. Access granted.
@Remote Communication Permission Setting
012
[0 to 2 / 1 / 1 /step]
RFU Timing
Selects the timing for the remote firmware updating.
013
[0 or 1 / 1 / – ]
0: Any status of a target machine
1: Sleep or panel off mode only
014 [0 or 1 / 0 / 1/step]
RCG-C Registed
This SP displays the RCG-N installation end flag.
021
0: Installation not completed
1: Installation completed
Connect Type (N/M)
This SP displays and selects the RCG-N connection method.
023
[0 or 1 / 0 / 1 /step]
0: Internet connection
1: Dial-up connection
061 Cert Expire Timing DFU
Proximity of the expiration of the certification.
[0 to 0xffffffff / 0 / 1 /step]
Main SP Tables-5
295