Ricoh Aficio MP C305SP Field Service Manual page 794

3. SP Mode Tables
207 Press Roller Temp Value3
208 Press Roller.End Temp Value3
[Fusing Jam Detection]
1142
This SP displays the SC code that was issued if a fusing unit jam error occurs three times
in succession.
001 SC Display
[Fusing Nip Band Check]
1152
Checks and adjusts the nip of the hot roller and pressure roller.
001 Execute
002 Pre-idling Time
003 Stop Time
004 Feed Time
1153 [Low Temp. Start Up]
Temp.:Threshold Value1
001
Sepcifies the threshold temperature 1 for the warming up in the low temperature
condition.
Temp.:Threshold Value2
002
Sepcifies the threshold temperature 2 for the warming up in the low temperature
condition.
Temp.:Target
003
Sepcifies the target temperature for the warming up in the low temperature condition.
Temp.:Rotation Threshold Value1
005
Sepcifies the threshold temperature 1 for the warming up rotation in the low temperature
condition.
58
*ENG [-50 to 260 / - / 1deg/step]
*ENG [-50 to 260 / - / 1deg/step]
[0 to 1 / 0: OFF / 1/step]
*ENG
0:OFF, 1:ON
[- / - / -]
*ENG
[Execute]
*ENG [0 to 999 / 300 / 1sec/step]
*ENG [0 to 100 / 20 / 1sec/step]
*ENG [0 to 10000 / 8316 / 1msec/step]
*ENG [-100 to 100 / -100 / 1deg/step]
*ENG [-100 to 100 / -100 / 1deg/step]
*ENG [-100 to 100 / -100 / 1deg/step]
*ENG [-100 to 100 / -100 / 1deg/step]