Ricoh Aficio MP C305SP Field Service Manual page 1426

3. SP Mode Tables
HP Detection Enable (BK
007
600x300 LG Simplex)
HP Detection Enable (FC
008
600x600 LG Simplex)
HP Detection Enable (BK
009
600x600 LG Simplex)
HP Detection Enable (FC
010
600x200 LG Simplex)
4020 [Dust Check]
001 Detection ON/OFF:face
002 Detection Level:face
003 Correction Level:face
[Scanner Erase Margin]
4400
Sets the Mask for Original.
These SPs set the area to be masked during platen (book) mode scanning.
001 Book: Leading Edge
002 Book: Trailing Edge
242
ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
ENG [0 or 1 / 0 / 1/step] 0:OFF, 1:ON
Turns the ARDF scan glass dust check on/ off.
*ENG [0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Selects the detect level.
[0 to 8 / 4 / 1/step]
*ENG
0: lowest detection level
8: highest detection level
Selects the level of the sub scan line correction
when using the ARDF.
[0 to 4 / 0 / 1/step]
0: Off
*ENG
1: Weakest
2: Weak
3: Strong
4: Strongest
*ENG [0.0 to 3.0 / 0.0 / 0.1mm/step]
*ENG [0.0 to 3.0 / 0.0 / 0.1mm/step]