Motor
7.2 Installation
Mounting variants
Motor
The motor can be installed horizontally or vertically. Horizontal installation with the cable
outlet at the bottom is recommend. The position of the axle of the belt pulley mounted on the
motor remains the same in both mounting positions.
Horizontal installation with the cable outlet at the bottom is shown in the following, generally
applicable installation steps.
Deflector pulley
The deflector pulley can be mounted in the following three ways:
①
Variant with small mounting bracket and deflector pulley mounted externally
②
Variant with large mounting bracket and deflector pulley mounted externally
③
Variant with large mounting bracket and deflector pulley mounted centrally
Mounting variant 1 is shown in the following, generally applicable installation steps.
92
Horizontal installation with the cable outlet at the bottom
Vertical installation with the cable outlet at the side
System Manual, 09/2017, A5E33917696-AD
ATE500E