Table of Contents
Advertisement
Terminal circuit diagrams for digital input signals
NOTICE
Settings required if the LIGHT BARRIER / DCPS input is not used
A jumper between X6 und X4 (
used for the light barrier or the DCPS and the LIGHT BARRIER / DCPS input is not
configured as "inactive".
a. Connection to an internal 24 V control voltage
b. Connection to an external control voltage
ATE500E
System Manual, 09/2017, A5E33917696-AD
6.6 Connecting terminals and interfaces
①
) is required if the LIGHT BARRIER / DCPS input is not
Controller
63
Advertisement
Table of Contents
