Table of Contents
Advertisement
The additional units are easy to connect to a deenergized controller via the interfaces
provided – and are available for use as soon as the power supply is connected.
Product
SIDOOR SERVICE TOOL
SIDOOR SOFTWARE KIT
The entire contents of the installation CD from the SIDOOR SOFTWARE KIT are also
available Installation package
(http://support.automation.siemens.com/WW/view/en/92418945) in the Industry Online
Support.
You can find additional information about the SIDOOR SOFTWARE KIT in the SIDOOR
SOFTWARE KIT Operating Instructions
(http://support.automation.siemens.com/WW/view/en/92711247).
ATE500E
System Manual, 09/2017, A5E33917696-AD
Article No.
6FB1105-0AT01-6ST0
6FB1105-0AT01-6SW0
Description
The SIDOOR Service Tool can be used to enter door com-
mands, to change the drive parameters and to read the
taught parameters, the door states, the input and output sig-
nals of the service data and the current firmware version.
The following connecting cables are included in the product
package:
1x D-SUB connecting cable (9-pin, plug/socket), length
•
2 m
1x D-SUB connecting cable (9-pin, socket/socket), length
•
2 m
The optional SIDOOR Software Kit facilitates user-friendly
operation and detailed diagnostics via a PC.
The package includes the following components:
Installation CD (Software Kit)
•
–
SIDOOR User Software
–
Siemens HCS12 Firmware Loader
–
SIDOOR USB to UART Bridge driver
–
SIDOOR Manager
–
License provisions
–
SIDOOR Software Kit Operating Instructions
1x USB adapter
•
1x USB connecting cable
•
1x D-SUB connecting cable (9-pin, plug/socket)
•
1x D-SUB connecting cable (9-pin, socket/socket)
•
Product family
3.2 Products
19
Advertisement
Table of Contents
