Changing The Parameters Normally Displayed - Roland SOUND Canvas P-55 Owner's Manual

ABOUT THE DISPLAY
The parameters shown in the P-55's display are as follows:
Parameter Group Parameter Normally Displayed
Part Parameter 1 Instrument Number
Part Parameter 2 Brilliance
System Parameter Tune (standard pitch)
When changes have been made in value, the value of the parameter being set is shown
momentarily. After a moment, however, the display will revert to its display of the
parameters above (Parameter Normally Displayed). You can view the eight parameter
indicators (which correspond to the buttons), and by noting which of them are lit,
determine which parameter the information in the display refers to.
@ Changing the Parameters Normally Displayed eeccceeccccccccccccce
14
<>
<2p
If you wish, you can set the unit so it normally displays other parameters. Three settings,
one for each of the three possible editing states (dark, flashing, or lit), can be made. This
allows you to configure the unit so it is more convenient for your needs.
Press the Parameter Group button and select the parameter group for which you want to
change the setting.
Press both the «<< and » buttons simultaneously for the parameter that you want to
normally have shown.
For example, while the Parameter Group button's indicator remains dark (Part Parameters
1 assessable), and you wish to thereafter have the Part Level be the parameter that is
usually displayed for that group, you would simultaneously press LEVEL ~«« and LEVEL » .