Table of Contents
Advertisement
Installing a simple-swap fan
Use this information to install a simple-swap fan into the server.
The server comes with one 92mm x 92mm x 38mm simple-swap fan (fan 2) in the fan assembly. The
following instructions can be used to install any simple-swap fan in the server.
Notes:
1. When you install the second microprocessor, you must also install fan 3. The fan filler can only be
removed when fan 3 is installed. Otherwise, the fan filler must be installed for proper cooling.
.
43
Chapter 2
Installing optional devices
Advertisement
Table of Contents
Troubleshooting
