Replacing An Adapter - Lenovo x3300 M4 7382 Installation And Service Manual

Notes:
• If you have installed the optional ServeRAID adapter memory module, remove it and keep it in
future use (see "Installing an optional ServeRAID adapter memory module" on page 67.
• If you are installing or removing an adaptor into or from PCI slot 4, you have to press the release
latch firstly as step 1 of the following illustration.
Step 10. Install the PCI slot filler.
Step 11. Move the adapter-retention brackets back to the close position.
Step 12. If you are instructed to return the adapter, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.

Replacing an adapter

Use this information to replace an adapter.
The following notes describe the types of adapters that the server supports and other information that you
must consider when you replace an adapter:
• To confirm that the server supports the adapter that you are installing, see
.
serverproven/
• Locate the documentation that comes with the adapter and follow those instructions in addition to the
instructions in this section.
• Do not set the maximum digital video adapter resolution above 1280 x 1024 at 75 Hz for an LCD monitor.
This is the highest resolution that is supported for any add-on video adapter that you install in the server.
• Avoid touching the components and gold-edge connectors on the adapter.
http://www.lenovo.com/
.
Chapter 6 Removing and replacing components
219