Replacing The Bezel - Lenovo x3300 M4 7382 Installation And Service Manual

Step 3. Pull the bezel out slightly until the tabs on the right-side of the bezel disengages from the chassis
and set it aside.
Step 4. If you are instructed to return the front bezel, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.

Replacing the bezel

Use this information to replace the bezel.
To replace the bezel, complete the following steps:
Step 1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on page
169.
Step 2. Turn off the server (see "Turning off the server" on page 24) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables as necessary to replace the
device.
Step 3. Remove the exiting bezel (see "Removing the bezel" on page 191).
Step 4. Touch the static-protective package that contains the bezel; then, remove the bezel from the
package.
Step 5. Insert the tabs located on the right-side of the bezel into the holes of the chassis.
Step 6. Rotate the bezel until its edges into position of the chassis correctly.
192
System x3300 M4 Installation and Service Guide