Lenovo x3300 M4 7382 Installation And Service Manual page 244

9. Press the latch of the expansion-slot cover kit from the rear side of the server (see step 1 in the following
illustration).
10. Remove the expansion-slot cover kit located in PCI slot 1 and save it for future use. (see step 2 in the
following illustration).
11. Press PCI-X riser-card assembly firmly into PCI slot 1.
Attention: Incomplete insertion might cause damage to the system board or the adapter.
12. Make sure the latch on the rear side of the PCI-X riser-card assembly is secured to the rear of the server
chassis.
232
System x3300 M4 Installation and Service Guide