Lenovo x3300 M4 7382 Installation And Service Manual page 262

Step 13. Connect the power, signal, and configuration cables to the 3.5-inch hard disk drive backplane (see
"Hard Disk Drive Backplane Connectors" on page 34 and "Internal Cable Routing and Connectors"
on page 172).
Step 14. For installing additional backplane, repeat steps 10 to 12 above.
Step 15. Install the 3.5-inch hot-swap hard disk drives (see "Installing a 3.5-inch hot-swap hard disk drive"
on page 54).
Step 16. Close the bezel.
Step 17. Install the fan assembly (see "Installing the fan assembly" on page 85).
Step 18. Install the air baffle (see "Replacing the air baffle" on page 196).
Step 19. Install and lock the left-side cover (see "Replacing the left-side cover" on page 194).
Step 20. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the
server.
Step 21. If you are instructed to return the drive backplane, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on
page 85.
250
System x3300 M4 Installation and Service Guide