Step 10. Start the Setup utility and reset the configuration.
a.
Set the system date and time.
b.
Set the power-on password.
c.
Reconfigure the server.
See "Using the Setup utility" on page 95.
Step 11. Either update the server with the latest RAID firmware or restore the pre-existing firmware from a
diskette or CD image (see "Updating the firmware " on page 91).
Step 12. Update the UUID (see "Updating the Universal Unique Identifier (UUID)" on page 111).
Step 13. Update the DMI/SMBIOS (see "Updating the DMI/SMBIOS data" on page 113).
Step 14. If you are instructed to return the system board, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Step 15. If you have other devices to install or remove, do so now. Otherwise, go to "Completing the
installation" on page 85.
.
Chapter 6
Removing and replacing components
287