Lenovo x3300 M4 7382 Installation And Service Manual page 207

Attention: Do not allow the server to fall over.
Step 4. Carefully position the server on a flat surface, with the feet hanging over the edge of the flat surface
to ease removal.
Step 5. Press in on the clips that hold the feet in place; then, remove the feet away from the server. In some
cases, you might need a screwdriver to press in on the clips.
Step 6. To reinstall the feet in the location, push the clips of the feet into the right place of the server.
Removing the air baffle
Use this information to remove the air baffle.
To remove the air baffle, complete the following steps:
1. Read the safety information that begins in "Safety" on page v and "Installation guidelines" on page 169.
2. Turn off the server (see "Turning off the server" on page 24) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables from the server.
3. Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention: Do not allow the server to fall over.
4. Unlock and remove the left-side cover (see "Removing the left-side cover" on page 193 ).
5. Lift the air baffle from the server and set it aside.
Attention: For proper cooling and airflow, replace the air baffle before you turn on the server. Operating
the server with the air baffle removed might damage server components.
.
Chapter 6 Removing and replacing components
195