Replacing An Authentication And Directory Server Disk - 3Com VCX V7000 Installation Manual

Replacing an
Authentication and
Directory Server Disk
b Enter these commands:
cd /etc/init.d
./vcx start
9 Restart VCX services on the Secondary IP Messaging Server.
a Log in as root. The default password for the root account is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
b Enter these commands:
cd /etc/init.d
./vcx start
After VCX services have started on the Primary and Secondary IP
Messaging Servers, the VCX system is fully operational.
This marks the end of the outage.
In each regional office there is one Authentication and Directory Server.
On each of these servers, database replication is configured for:
Each branch office that is associated with the local regional office
■
The Authentication and Directory Server in the remote regional office
■
The instructions in this section assume two regional offices only, with
database replication between the Authentication and Directory Servers
(one in each of the regional offices). Database replication between
Authentication and Directory servers in multiple regions is more complex.
For assistance in configuring multiple regional offices contact 3Com
Customer Service or your Voice Authorized 3Com Reseller.
Terminology: In this section, the term "down server" refers to the server
that is located in the local regional office. The term "running server"
refers to the server that is located in the remote regional office.
If this server is configured for RAID operation, see
earlier in this appendix.
Replacing a Disk (Regional Office)
RAID Disk
403
Failure,