3Com VCX V7000 Installation Manual page 198

198 C 4: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Primary IP Messaging Server (continued)
IP address of IPMSG client 1
Client IP Address
Hostname of IPMSG client 1
Client Hostname
Do you wish to change any of the IP Messaging Service parameters? [N] :
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination
In some cases it may be desirable for SNMP Traps to be sent to multiple
destinations. Additional Trap Destinations can be entered here.
input to indicate that all destinations have been entered.
IP Address of the first additional trap destination for this system.
Trap Destination
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
IP M S
ESSAGING ERVER
Enter the IP address of the first IP Messaging Client.
Enter the hostname of the first IP Messaging Client.
You can enter up to 20 IP Messaging Clients. To finish entering clients,
press the Enter or Return key when prompted for the IP address of the
next client.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
:
:
:
Enter a blank
: