3Com VCX V7000 Installation Manual page 168

168 C 3: I
HAPTER NSTALLING AN
Sample Network Configuration Script — Branch Office IP Telephony Server (continued)
------------------------- Configuring DNS Servers -------------------------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server
Secondary DNS Server
Tertiary DNS Server
----------------------- Configuring DNS Search Path -----------------------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path :
-------------------- Configuring Network Time Protocol --------------------
Enter NTP servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary NTP Server
Secondary NTP Server
Tertiary NTP Server
-------------------------- Configuring Time Zone --------------------------
The system can be set to use Coordinated Universal Time (UTC, sometimes called
Greenwich Mean Time or GMT) or to a local timezone.
timezone.
Will this system use UTC? [no] :
Please select a geographic location from the following list:
1. Africa
2. Americas
3. Antarctica
4. Arctic Ocean
IP T S
ELEPHONY ERVER
Branch office servers have only one network interface (eth0) enabled.
Enter no information for IP Address, Subnet Mask, or Default Gateway
Address.
:
:
:
Enter up to three DNS server IP addresses.
Enter the DNS search path appropriate for this site.
:
:
:
Enter one or two NTP server IP addresses.
CAUTION: If VCX systems are not synchronized via NTP, timing-related
problems can occur.
Most systems use a local