3Com VCX V7000 Installation Manual page 309

Sample Services Configuration Script — Secondary Authentication and Directory Server
(continued)
In a regional office, IP Messaging can be used in two ways.
Messaging configuration, the regional IP Messaging servers are used by the
entire organization including branch offices.
configuration, the regional IP Messaging servers are used only by the
regional office, and branches have their own IP Messaging systems.
regional office that has no branch offices uses Local Messaging. Note: This setting
cannot be changed after initial setup is complete, so be certain it is correct.
Is Global Messaging in use? (Y/N) [N]
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor
The primary Provisioning Service is used for Web based configuration. Web Services
provide access to IP Telephony services via the web server.
which provides primary Call Processing services.
server has two IP interfaces, specify the IP address which is associated with 'eth0'
here. This address will be allowed access to certain services on this system, for
redundancy.
IP address of the primary Provisioning & Web Services
The secondary Call Processor acts as a backup if the primary is down or
unreachable. If there is no secondary Call Processor in your installation, leave
this entry blank.
IP address of the secondary Call Processor
The secondary Provisioning Service is used for Web based configuration. Web Services
provide access to IP Telephony services via the web server.
which provides secondary Call Processing services. If the secondary Call Processing
If this VCX system is being configured to have IP Messaging services
delivered locally by each branch office IP Messaging Server to users in
that branch office, press the Enter or Return key to accept the default
answer (N). If IP Messaging Services will be delivered to users throughout
the VCX system by IP Messaging Servers in regional offices, enter Y.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server.
Provisioning tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server.
In a Global
In a Local Messaging
:
:
These run on the server
If the primary Call Processing
:
:
These run on the server
309
A