3Com VCX V7000 Installation Manual page 400

400 A B: R
PPENDIX EPLACING A
F D VCX S
AILED ISK ON A
5 After the reboot process has been completed, configure VCX services on
the down server using this command:
vcx-setup
The script detects that you have already configured the networking
parameters for the server and prompts you to configure VCX services.
If the down server is the Primary IP Messaging Server, follow the
instructions in Configuring a Primary IP Messaging Server
If the down server is the Secondary IP Messaging Server, follow the
instructions in Configuring a Secondary IP Messaging Server
After VCX Services have been configured, this message appears.
Please wait while the wizard completes.
The script displays several status messages and exits.
Restoring an IP Messaging Server to Service
Follow the instructions in this section to complete a disk replacement on
a Primary or Secondary IP Messaging Server.
1 Stop all VCX processes on the down server.
a On the down server, log in as root. The default password for the root
account is pvadmin.
CAUTION: 3Com strongly recommends that customers change this
password on all VCX servers. Guidelines about other passwords and other
security-related issues can be found in the "VCX Security Guide."
b Enter these commands:
cd /etc/init.d
./vcx stop
2 Back up the IPMSG database on the running server. For instructions, see
the IPMSG Operations and System Administration Guide.
3 Stop all VCX processes on the running server.
a Log in as root and enter these commands:
cd /etc/init.d
./vcx stop
ERVER
in Chapter 4.
in Chapter 4.