3Com VCX V7000 Installation Manual page 165

Sample Services Configuration Script — Secondary IP Telephony Server (continued)
Enable management station authentication? [N]
Common Agent supports the SNMP V3 protocol. Answering 'Y' here will allow an SNMP
management station to use the secure SNMP V3 protocol to manage this VCX system. (You will be
able to configure passwords for pre-configured user names next. These authentication and privacy
passwords should be used from EMS or other management stations when using SNMP V3). Note
that the SNMPV3 feature cannot be enabled from EMS or other management stations.
Enable SNMP V3 access [N]
Do you wish to change any of the Common Agent parameters? [N] :
----------------------------------------------------------------------------
Please wait while the wizard completes.
End of Sample Services Configuration Script — Secondary IP Telephony Server
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. The script will then accept
the IP addresses of up to four network management stations.
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
The script now saves all of the configuration parameters, displays several
status messages, and exits.
:
165