3Com VCX V7000 Installation Manual page 359

Ip telephony solution system release 9.0

Hide thumbs Also See for VCX V7000:

Table of Contents

h In the confirmation window that appears, click OK.

While the gateway is rebooting, disconnect the Ethernet crossover

cable from the front panel and reconnect the original Ethernet cable.

At any time during the network configuration process, you can reset the

V6100 Integrated Branch Communications platform to the original

factory settings. To do so, press the reset button and hold it for a

minimum of 6 seconds. The reset button is located inside the front panel

of the CPU module. A semi-circular opening, located directly above the

serial port provides access to the reset button.

CAUTION: Use a non-conducting probe to press the reset button in

order to avoid contact between the chassis and any of the pins in the

serial port.

Gateway Installation