3Com VCX V7000 Installation Manual page 235

Sample Services Configuration Script — IP Messaging Client (continued)
------------------------- Configuring VCX Services -------------------------
This system runs IP Messaging services.
Please enter the role of this system:
1 - This is a regional office, primary IP Messaging server OR a standalone IP
Messaging server.
2 - This is a regional office, secondary IP Messaging server.
3 - This is a branch office IP Messaging system.
4 - This system is a client in an IPMSG client-server deployment.
5 - This is an NBX IP Messaging server.
Enter your choice by number [1] : 4
Services running on this system need to communicate with other systems and
devices in order to operate.
asked for information about these, and for other global parameters.
The primary Call Processor has principal responsibility for handling calls.
IP address of the primary Call Processor
The secondary Call Processor acts as a backup if the primary is down or
unreachable. If there is no secondary Call Processor in your installation, leave
this entry blank.
IP address of the secondary Call Processor
Enter 4 to configure this server as a client in an IP Messaging Client/Server
configuration.
In the next series of questions, you will be
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Primary Call Processing Server.
Call Processor tasks are associated with the eth1 network interface. Enter
the IP address of eth1 on the Secondary Call Processing Server.
:
:
235