3Com VCX V7000 Installation Manual page 227

Enable management station authentication? [N]
Common Agent supports the SNMP V3 protocol.
management station to use the secure SNMP V3 protocol to manage this VCX system.
(You will be able to configure passwords for pre-configured user names next. These
authentication and privacy passwords should be used from EMS or other management
stations when using SNMP V3.) Note that the SNMPV3 feature cannot be enabled from
EMS or other management stations.
Enable SNMP V3 access [N]
Do you wish to change any of the Common Agent parameters? [N] :
----------------------------------------------------------------------------
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. If you answer Y, the script
prompts you for the IP addresses of up to four authorized network
management stations.
Review the information for accuracy and if it is correct, press the Enter or
Return key. If you want to change any of the information, enter Y.
:
Answering 'Y' here will allow an SNMP
227