3Com VCX V7000 Installation Manual page 266

266 C 6: I
HAPTER NSTALLING A
Sample Services Configuration Script — Primary Call Processing Server (continued)
------------ Configuring additional parameters for Call Processor -----------
Trusted Endpoints are allowed to send SIP Notify messages to the Call Processor.
Certain Trusted Endpoints are configured automatically. Additional Trusted Endpoints
can be entered here.
entered.
Additional Trusted Endpoint IP address
TrustedAddress
Do you wish to change any of the Call Processor parameters? [N] :
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps.
Trap Destination
In some cases it may be desirable for SNMP Traps to be sent to multiple
destinations. Additional Trap Destinations can be entered here.
input to indicate that all destinations have been entered.
IP Address of the first additional trap destination for this system.
Trap Destination
The Write Community String specifies the community string to be used by a
management station when sending write requests to this system.
Write Community String
The Read Community String specifies the community string to be used by a
management station when sending read requests to this system.
C P S
ALL ROCESSING ERVER
Enter a blank input to indicate that all endpoints have been
Enter the IP address of any server or device that you want to be included
in the list of trusted endpoints. To stop entering trusted endpoints, press
the Enter or Return key when prompted for another entry.
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
CAUTION: Press the Enter or Return key to accept the default answer
(private). 3Com strongly recommends that users change this string for
security reasons.
:
:
Enter a blank
:
: private