3Com VCX V7000 Installation Manual page 406

406 A B: R
PPENDIX EPLACING A
F D VCX S
AILED ISK ON A
The script displays several status messages and exits.
Final Configuration of the Authentication and Directory Server
1 For each branch office that is associated with the local regional office,
configure the VCX Firewall software to permit Oracle access. For
example, to configure access for four branch offices with IP addresses
10.50.101.5 through 10.50.104.5, use these commands:
modfw -p oracle allow 10.50.101.5
modfw -p oracle allow 10.50.102.5
modfw -p oracle allow 10.50.103.5
modfw -p oracle allow 10.50.104.5
2 On the Primary Call Processing Server in the local regional office, stop the
tomcat process.
a Log in as root.
b Enter these commands:
3
service vcxtomcat stop
local regional office, stop the tomcat process.
a Log in as root.
b Enter these commands:
service vcxtomcat stop
4 On the Primary Call Processing Server in the remote regional office, stop
the tomcat process.
a Log in as root.
b Enter these commands:
service vcxtomcat stop
5 On the Secondary Call Processing Server in the remote regional office,
stop the tomcat process.
a Log in as root.
b Enter these commands:
service vcxtomcat stop
6 On the running Authentication and Directory Server in the remote
regional office, stop the vcxdata process.
a Log in as root.
b Enter these commands:
ERVER
On the Secondary Call Processing Server in the