3Com VCX V7000 Installation Manual page 334

334 C 9: I
HAPTER NSTALLING
D
EVICES
VCX systems typically have two Call Processing servers. One is the primary
server and the other is the alternate server, which is available for fail-over
purposes.
9 Press the Program button.
10 Press 6 (VCX Cnfig Menu).
11 Press 1 (Alt Dnld Servr).
12 Enter the IP address of the Alternate Call Processing Server.
13 Press # to save the Alternate Call Processing Server setting.
14 Connect the Ethernet data cable to the telephone.
15 Disconnect and reconnect the telephone power cord.
The telephone:
Obtains an IP address from a DHCP in your network.
■
Contacts the Primary Call Processing Server and begins to download
■
the appropriate software.
During the downloading process, several progress messages appear in
the telephone display panel. After the software has been downloaded to
the telephone, the message "Local Phone Number:" appears.
To log in on the telephone, a user enters:
An extension number, followed by #
■
A numeric password, followed by #
■
To assign a telephone extension to a user, you must configure the
telephone extension number and user ID using the VCX Administrator
User Interface. For information about how to perform these tasks, refer
to the VCX Administration Guide.