3Com VCX V7000 Installation Manual page 123

Sample Services Configuration Script — Branch Office Server (continued)
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next.
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N]
Common Agent supports the SNMP V3 protocol. Answering 'Y' here will allow an SNMP
management station to use the secure SNMP V3 protocol to manage this VCX system. (You will be
able to configure passwords for pre-configured user names next. These authentication and privacy
passwords should be used from EMS or other management stations when using SNMP V3.) Note that
the SNMPV3 feature cannot be enabled from EMS or other management stations.
Enable SNMP V3 access [N]
Do you wish to change any of the Common Agent parameters? [N] :
----------------------------------------------------------------------------
Please wait while the wizard completes.
End of Sample Services Configuration Script — Branch Office Server
Authorized management stations can
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. If you answer Y, the script
prompts you for the IP addresses of up to four authorized network
management stations.
Review the information for accuracy and if it is correct, press the Enter or
Return key. If you want to change any of the information, enter Y.
The script now saves all of the configuration parameters, displays several
status messages, and exits.
:
123