3Com VCX V7000 Installation Manual page 102

102 C 2: I
HAPTER NSTALLING AN
Sample Services Configuration Script — Secondary Server (continued)
Enable management station authentication? [N]
IP Address of the first Authorized Management Station for this system.
Authorized Address
Netmask for the first Authorized Management Station
Netmask
IP Address of the second Authorized Management Station for this system.
blank value is allowed.
Authorized Address
Netmask for the second Authorized Management Station
Netmask
IP Address of the third Authorized Management Station for this system.A
blank value is allowed.
Authorized Address
Netmask for the third Authorized Management Station
Netmask
IP T M
ELEPHONY AND ESSAGING
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter Y. The script will then accept
the IP addresses of up to four network management stations.
Enter the IP address and the subnet mask appropriate for the first
Authorized Management Station. To accept the default subnet mask of
255.255.255.255, press the Enter or Return key.
Enter the IP address and the subnet mask appropriate for the second
Authorized Management Station. If you do not want to configure a
second station, leave this blank by pressing the Enter or Return key. To
accept the default subnet mask of 255.255.255.255, press the Enter or
Return key at the Netmask prompt.
Enter the IP address and the subnet mask appropriate for the third
Authorized Management Station. If you do not want to configure a third
station, leave this blank by pressing the Enter or Return key. To accept the
S
ERVER
:
:
:
:
:
:
:
A