Editing Option 184 Values - 3Com VCX V7000 Installation Manual

Editing Option 184
Values
Configuring the
IP Address of the
Primary Server
9 Click OK.
In the Predefined Options and Values dialog box, the DHCP Microsoft
Management Console creates a new option name by combining the
option number with the name that you chose and adds this name to the
Option name drop-down list.
Example: If you used VCX as the option name, the system adds 184 VCX
to the drop-down list.
To edit Option 184 values:
1 Select the new option name from the Option name drop-down list, and
click Edit Array. The Numeric Value Array Editor dialog box appears.
2 In the Data entry area of the dialog box, click the Decimal radio button at
the right of the word Format.
3 In the Current Values text box, highlight the 0 (zero), and click Remove.
4 To create the new value, enter each element of the new value:
a Click in the New value text box.
b Type the individual element value.
c Click Add.
Suboption 1 of option 184 defines the IP address of the VCX Primary
Server. For each element in
the beginning of this topic. As you add each element, it appears in the
Current values list, above previously added values.
Add these elements in this order:
Table 14 Configuring the IP Address of the Primary Server
What You Type Description
1
4
NOTE: The next four fields use 10.234.1.254 as an example IP address of the VCX
Primary Server. Enter the IP address of your primary server.
10
Table 14, repeat steps 4 a, b, and c, listed at
Enter 1 as the first suboption code for option 184.
The length of the argument that applies to this suboption. For
option 184, suboption 1, the argument is an IP address, which is
composed of four numerical fields (octets).
The first octet in the IP address.

Editing Option 184 Values

369