Backing Up License Files; Keeping Your License Key Valid - 3Com VCX V7000 Installation Manual

Backing Up License
Files
Keeping Your License
Key Valid
Activation Key Successfully Validated
Success: Activation key validated and installed.
The license key is installed in the
activation key is symbolically linked to the license key file as shown in the
following example:
ls -l
total 8
lrwxrwxrwx 1 root
activation.key ->
/opt/3com/licenses/SNAm-Fro7-vrJa-YKhH-H8az-db7Q.activation.
key
-rw-r--r-- 1 root
SNAm-Fro7-vrJa-YKhH-H8az-db7Q.activation.key
You can use the
vcx-licensequery --all
information about the currently installed VCX software license, for
example, serial number, customer name, expiration date, and number of
supported phone and IP Messaging clients.
3Com strongly recommends that users save copies of their license key
files in a separate safe location. If any VCX server experiences a disk
failure or any other problem that requires the VCX software to be
reinstalled, the license key file will be available during that process.
VCX software license keys are generated based on the machineid of the
logical partition (for System i) or the server (for other servers).
For iSeries servers, the machineid is based on the server along with the
physical and virtual adapters that are associated with the logical partition
(LPAR). CPU and memory resources are not considered in order that users
can adjust the CPU and memory resources as needed without changing
the machineid and thereby invalidating the license.
For all other servers, the machineid is based on several elements of the
hardware environment. Disks are excluded so that if you replace a failed
disk, your machineid does not change and your license remains valid.
/opt3com/licenses
root 63 Jun 15 2006
root 1792 Jun 15
command to display
License Keys 23
directory and the
2006