To Set Up The Cross Talk Test - Agilent Technologies 35670A Installation Manual

Verifying Specifications

To set up the cross talk test

To set up the cross talk test
Performance Test only
This test verifies that the Agilent 35670A meets its input specification for
channel-to-channel and channel-to-source cross talk. In this test, the
Agilent 35670A measures the amount of energy induced from the source or input
channel to another input channel. For source-to-channel crosstalk, the analyzer's
source is set for 25.6kHz, 9 dBVrms and the signal level at the input channels is
measured. For channel-to-channel crosstalk, the frequency synthesizer outputs a
25.6kHz or 51.2kHz, 9dBVrms signal to all but one input channel and the signal
level at the unused input channel is measured.
1
2 ch
2
2 ch
3-30
Agilent 35670A