Agilent Technologies 35670A Installation Manual page 106

Verifying Specifications
Start Testing Menu Descriptions
Press [ START TESTING ] to display
the following softkeys:
[ START BEGINNING ]
Prints the test record title page
information and starts the selected test
procedure at the beginning. When you
select [ START BEGINNING ], the
data is written to a file on the disk and
printed only after all tests are done.
[ START MIDDLE ]
Displays a list of all the tests in the
selected procedure. Testing starts with
the test you select and continues
through the remainder of the tests in the
list. When you select
[ START MIDDLE ], the data is printed
immediately after each measurement.
[ ONE TEST ]
Displays all the tests in the selected
procedure. The test you select is the
only test performed. When you select [
ONE TEST ], the data is printed
immediately after each measurement.
[ RETURN ]
Returns to the ITM_35670A main menu.
3-50
Start a test to display the following
softkeys:
[ STOP TESTING ]
Stops the test and returns to the
ITM_35670A main menu.
[ RESTART TEST ]
Starts the current test over. Any
connection prompts are repeated.
[ RESTART MEAS ]
Starts the current measurement over.
The following softkeys also appear
when the program is waiting for you to
press [ CONTINUE ]:
[ STOP BEEPING ]
Turns off the beeper prompt for the
remainder of this measurement.
[ CONTINUE ]
Continues the test. Press this key after
following the directions on the display.
Agilent 35670A