To Set Up The External Trigger Test - Agilent Technologies 35670A Installation Manual

Agilent 35670A

To set up the external trigger test

Performance Test only
This test verifies that the Agilent 35670A meets its trigger specification for external
trigger level accuracy. In this test, a frequency synthesizer outputs a 1kHz signal to
the external trigger input and a 12.8 kHz signal to channel 1. The analyzer makes
an accurate triggered measurement on channel 1 to verify the trigger level and
slope.
1
2 ch
Using an HP 3326A
1
4 ch
Using an HP 3326A
Verifying Specifications
To set up the external trigger test
3-35